|
|
|
|
Expand audio system possibilitieswith REAC and MADI
The S-MADI REAC Bridge is a bi-directional signal converter between REAC and MADI. This bridge enables connectivity between MADI-equipped digital audio mixers/systems to any REAC-based devices such as the popular M-48 Personal Mixing System, Digital Snakes, V-Mixer Consoles, and Multi-channel Live Recording.
Key Features
- Bi-directional format conversion between REAC and MADI
- BNC and Optical MADI ports
- Supports REAC Embedded Power and Split out for connecting and power additional devics (e.g., M-48 Personal Mixer, S-0808)
- Support for 44.1/48kHz with WORD, MADI or REAC clocks
- Preamp and personal mixing control with S-4000RCS (Remote Control Software)
Bridging REAC with MADI
S-MADI is bi-directional format converter between REAC and MADI. Up to 40x40 channels of digital audio transmission is possible between MADI equipment and REAC products such as the Digital Snake series, V-Mixers, and M-48 Live Personal Mixers. Both BNC and Optical I/O ports are included along with support for 56/64Ch mode. Clock source can be selected from REAC, MADI or Word Clock.
 REAC SPLIT OUT The REAC SPLIT OUT port provides audio signal from REAC or MADI enabling a separate monitoring or recording audio signal from the main stream. The SPLIT OUT supports REAC Embedded Power which supplies both the audio stream as well as power to a M-48 Live Personal Mixer or S-0808 Digital Snake.
 Remote Control A connected Digital Snake can be controlled using the S-4000R Remote Controller. Using the S-4000RCS dedicated software also enables control of Digital Snake and M-48 Personal Mixing setup and monitoring parameters.
 REAC Technology
The REAC (Roland Ethernet Audio Communication) protocol is an industry proven, low latency, high quality 24 bit/ 96 kHz audio transport protocol used by the S-1608 and S-0816. The REAC protocol allows the Digital Snake’s signal to be “split” to as many positions as required such as monitor, broadcast and recording splits using the RSS S-4000-SP or any standard gigabit Ethernet switch.
Main Specifications
| S-MADI Specifications |
| Sampling Frequency |
48 kHz/44.1 kHz |
| MADI Channel Mode |
64 Ch/56 Ch |
| Connectors |
Front Panel: REMOTE (D-sub 9-pin type, RS-232C)
Rear Panel: REAC MAIN (RJ-45 EtherCon type)
REAC SPLIT OUT (REAC EMBEDDED POWER, RJ-45 EtherCon type)
WORD CLOCK IN (BNC type), WORD CLOCK OUT (BNC type)
Coaxial MADI IN (BNC type), Coaxial MADI OUT (BNC type)
Optical MADI IN/OUT (SC duplex type) |
| Power Supply |
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
| Current Draw |
0.7 A (REAC Embedded Power: Maximum) |
| Dimensions |
482.0˜(W) x 302.7 (D) x 44.0 (H) mm
19 (W) x 11-15/16 (D) x 1-3/4 (H) inches |
| Weight |
3.5 kg/7 lbs 12 oz |
|
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
|
The following is a list of digital consoles, interface and other devices that support MADI so can therefore be used with the S-MADI – opening up the world of REAC products include M-48 Personal Mixing, Digital Snakes and Multi-channel recording.
Digital Consoles
Allen & Heath iLive – add M-MADI-A card (64 channel)
Avid Venue – MADI Option Card
DiGiCo D and SD Series – MADI already included
Midas Digital Consoles - Klark Teknik DN9650 Network Bridge
Soundcraft Vi Series – MADI already included
Yamaha – add MY16-MD64 (16 channel master) plus MY-16EX (16 channel expansion)
MADI Interfaces
Coming soon
MADI Recorders
Coming soon
|
PRODUCTS 
Brochure 695
